Adjusting turboxs manual boost controller

 · 1. First, you will need to adjust spring through the center hex nuts from the side brass container. If you shake the boost controller, you will hear the ball and spring moving, turn it about 2 turns counter clock wise. Shake boost controller. You won't hear the ball and spring moving anymore. 2.  · Insert the waste gate supply hose onto the blue colored nipple. Secure the hoses with hose clamps. Alternatively, use the hose extension which eliminates the need to cut the pre-existing pressure hose. The Boost Controller can be mounted with the mounting bracket. TurboXS Chennault Way, Ste. G Gaithersburg, Maryland United States. sales@www.doorway.ru

1. First, you will need to adjust spring through the center hex nuts from the side brass container. If you shake the boost controller, you will hear the ball and spring moving, turn it about 2 turns counter clock wise. Shake boost controller. You won't hear the ball and spring moving anymore. 2. Using the stock boost solenoid, TT chip and rod, I have the boost set at 20psi. I understand with this setup, the rod is the final boost setting. With a manual boost controller (non bleed off style) will the rod setting be the final boost setting or will the manual boost controller over ride the rod setting? I'm trying out a Grimmspeed mbc. I found the TurboXS manual for it but its still not very clear cut instructions with the course adjustment and fine adjustment. From what i read if i don't have it set right, it can cause extra boost lag. Some people talk about shaking the BC and adjust it till you no longer hear it rattle inside. I dont know, Just a little confused about it.

1. Attach supplied mounting bracket to manual boost controller using a 3mm hex wrench. 2. Find a proper location in the engine bay to mount the manual boost controller. You can either use the included bolt and nut (for through hole mounting), reuse a factory bolt, or use a zip tie to attach the boost controller. Adjusting Manual Boost Controller. Thread starter Silver; Start date ; #1 Silver. Proven Member. 20 0 California, USA, Southern. The boost pressure is adjusted via the adjusting screw located internally on the top of the TurboXS Boost Controller. The vehicle’s boost pressure can be increased by winding the adjusting screw in the counter-clockwise direction.